Children’s bumper cars can be called the most popular electric amusement equipment for children in Australia. If investors operate children’s bumper cars, choosing the right venue and the correct use method can reduce the frequency of failures, increase the service life of children’s bumper cars, and save the cost of use. So how to choose a bumper car for sale for children, and how to choose a suitable venue for bumper cars?
How to Choose the Right Venue for Children’s Bumper Cars
- How to Choose a Bumper Car for Children
When putting a child bumper car, try to put the same child bumper car and other amusement park rides together, do not operate the plush electric toy car and the bumper car on the same site, the plush electric toy car has a high center of gravity, which is easy to be knocked over by the bumper car. have an accident.
- The children’s bumper cars put together should be of the same model as much as possible, to avoid a large size difference, in case of a loss of balance during a collision.
Requirements for site Selection
- The surface of the children’s bumper car business site must be flat and smooth, such as a flat cement floor, ceramic tile floor, marble floor, etc.
- Cracks or gaps on the ground can cause poor ride comfort, may also cause malfunction or damage of electronic components, and may also cause damage to the frame, breakage of the motor output shaft, and breakage of the wheels.
- Rough ground is easy to cause excessive wear of children touching the wheels. The frequency of wheel replacement, especially the replacement of drive wheels will increase accordingly.
- The children’s bumper car operation site should be level, and the slope should not exceed 10 degrees. If the slope is too large, the bumper car’s uphill speed will be slow, and the speed when going downhill is too fast to control.
- There can be no ditch or pool around the site. When there is a ditch or pool, there must be comprehensive protective measures to avoid damage to the vehicle and dangerous accidents.
- The area of the children’s bumper car operating area is not as large as possible. The maximum use area of each child’s electric play equipment such as a bumper car is not more than 10 square meters and the minimum is not less than 5 square meters. In order to prevent pedestrians from entering and colliding with vehicles and being injured, so as to avoid causing economic losses.
- There must be no sharp metal parts or corners on the ground or around the children’s bumper car operating site to prevent the sharp objects from damaging the car body and the crash bars.
Above are the steps for choosing place for bumper cars. If you want to start a new business on bumper car rides https://australiaamusementrides.com/bumper-cars-for-sale-in-australia/, hope this article is useful for you.
